Solenoid valve control »logiBUS®« (complete)

Solenoid valve control »logiBUS®« (complete)
Freely configurable/ Expandable incl. X-Board and job computer
The »logiBUS®« solenoid valve control unit is connected to the ISOBUS socket in the rear of the tractor using a 9-pin data cable. If desired, the wiring harness can also be easily integrated via the 4-pin Deutsch plug on the back of the ISOBUS socket at the rear, leaving the tractor socket free for other devices. The integrated job computer generates the user interface on your ISOBUS terminal and forms the link between the terminal and any hydraulic block or hydraulic control system. The supplied solenoid valve cables are plugged into the industrial distributor board and connected to the valve block. You can choose between solenoid valve connector type A DIN 175301-803 block design, AMP connector or DT06-2s Deutsch connector.
The system therefore allows you to control any device conveniently from the cab at the touch of a button using Plug & Play. You can also freely select all configurations yourself via your Isobus terminal. For example, you can assign a float position to the various solenoid valve outputs if the valve block contains this function.   Product information
» Dimensions (W x L x D): 97 x 265 x 34 mm
» Material (housing): PA, reinforced
» CAN / sensor / module supply connection: DT-4
» Actuator supply connection: DT-18 (A-cod.)
» Ios connection: DT-4
» Operating voltage: 8-32 V DC
» Operating current per contact / potential (max.): 13 A
» Total current (max.): 52 A
» Protective device Supply: Reverse polarity protection
» Module diagnostics: Undervoltage | Overvoltage | Overtemperature
» LED indicators: Power: blue | Bus: green | Status: green | Actuator potential: blue | Signal: yellow | Error: red
» Total number of outputs: 16
» Number of digital outputs DO: 16
» DO output current max.: 2x 10 A | 14x 4 A
» Output protection: overload | short circuit
» Output diagnostics: Current current value | overcurrent | short circuit
» Protection class: IP 67 | IP 68, IP 69K (with MDC connection cables)
» Ambient temperature -40 °C...+80 °C
» Storage temperature -40 °C...+85 °C
» EMV: EN 61000-6-2 | IEC/EN 61000-6-3 | EN 61000-6-4 | ISO 13766-1 | ISO 13766-2   Scope of delivery
» X-Board with 16 outputs 
» Job computer
» Isobus cable harness 9-pin to DT-4
» 8x solenoid valve connector from DT-4 to DT-06/ block connector/ AMP connector
» 8x sealing cap   Optional
» Isobus terminal CCI 200 / CCI 800 / CCI 1200 (can also be connected to existing terminals)
» Control block (individually selectable)