![Please wait...](https://agro-center.de/out/NOX/img/loading.gif)
Description
Frost-Protection Heating Cable with Thermostat, 230 V / 223586
length 4m / 64W
- keeps your water line frost-free to -45 °C
- integrated frost-protection thermostat (switch-on temperature approx. +5 °C, switch-off temperature approx. +13 °C)
- do not use on heating pipes
- when insulated additionally, please do not insulate the thermostat
- Do not mount where animals can reach!
- IPX7
- VDE tested heating cable
- prevents water pipes from freezing
- thermostat in the heating cable automatically switches the cable on
What to remember about 230 V heating cables:
- always attach the heating cable to the underside of the pipe
- the water pipe must be earthed
- the 230 V heating cables are ready to connect and should be connected to a power supply with a circuit breaker (30 mA residual current circuit breaker)
- the heating cables must not be shortened and should therefore be ordered in the correct length
- excess length can be wound around the pipe (note that a winding distance of at least 15 mm must be maintained between coils)
- do not bend the heating cable and note the maximum bending radius of approx. 50 mm
- the heating cables can be secured to the pipe with insulating tape or aluminium tape (222809)
- if using plastic pipes, aluminium tape (222809) must be wrapped around the pipe before routing the heating cable
- the pipeline and heating cable should be insulated with a max. insulation of 13 mm
- the thermostat on the heating cable should be attached at the coldest position on the pipe
- the thermostat may only be insulated moderately
- do not use 230 V heating cables in animals' bite areas
- installation must be carried out in accordance with VDE0100 by a trained professional
Similar articles
Used to support your selection