Frost-Protection Heating Cable with Thermostat, 230 V

Frost-Protection Heating Cable with Thermostat, 230 V / 223589
length 18m / 288W

• keeps your water line frost-free to -45 °C
• integrated frost-protection thermostat (switch-on temperature approx. +5 °C, switch-off temperature approx. +13 °C)
• do not use on heating pipes
• when insulated additionally, please do not insulate the thermostat
• Do not mount where animals can reach!
• IPX7
• VDE tested heating cable
• prevents water pipes from freezing
• thermostat in the heating cable automatically switches the cable on

What to remember about 230 V heating cables:

• always attach the heating cable to the underside of the pipe
• the water pipe must be earthed
• the 230 V heating cables are ready to connect and should be connected to a power supply with a circuit breaker (30 mA residual current circuit breaker)
• the heating cables must not be shortened and should therefore be ordered in the correct length
• excess length can be wound around the pipe (note that a winding distance of at least 15 mm must be maintained between coils)
• do not bend the heating cable and note the maximum bending radius of approx. 50 mm
• the heating cables can be secured to the pipe with insulating tape or aluminium tape (222809)
• if using plastic pipes, aluminium tape (222809) must be wrapped around the pipe before routing the heating cable
• the pipeline and heating cable should be insulated with a max. insulation of 13 mm
• the thermostat on the heating cable should be attached at the coldest position on the pipe
• the thermostat may only be insulated moderately
• do not use 230 V heating cables in animals' bite areas
• installation must be carried out in accordance with VDE0100 by a trained professional