Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!

Turbo filler for vacuum drum ‘Type 460 D’ - Item no. = GFZXXX800193
6" / right-hand attachment

It can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws.
The filler is equipped with an industrial oil motor for continuous high-pressure operation of more than 20 kW.
This innovative, large-volume design enables an intake capacity of approx. 6,000 litres/minute to be achieved with an intake pipe diameter of 150 mm and a suction height of approx. 4 m.
With this new version, the compressor can be switched off as soon as the slurry is in the turbo filler. The filler pushes the slurry into the tank even without a vacuum. This results in less wear and tear and the tank is filled to 100% capacity, even with thick slurry.
The pump can also be switched on and off while driving (double bearing, external oil motor). Particularly long service life thanks to special bearings and seals.

It serves to relieve your compressor and fills the vacuum barrel to the brim in just a few minutes!
The scope of delivery includes the turbo filler (without accessories) including hydraulic components:
(hydraulic hoses NW12 & NW16/3500 mm length, hydraulic plug and fastening cable ties)

To mount it on the drum, order the 6‘ to 8’ elbow at the same time!

Please note! Functionality can only be guaranteed if you have at least 50 litres of oil capacity.

Technical data:
» Impeller diameter: 350 mm
» Outer diameter: 565 mm
» Length: approx. 250 mm (without oil motor)
» Oil drive with powerful industrial motor up to 200 bar continuous pressure.
» Required oil capacity approx. 50 litres.
» Double bearing (oil motor external) - ensuring a long service life.

Filling statistics (approx. figures):
Thin slurry (e.g. pig slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.5 min
40 litres 8000 litres 4.0 min

Thick slurry (e.g. cattle slurry):
Oil output / filling quantity / filling time
60 litres 8000 litres 2.8 min
45 litres 8000 litres 3.5 min

For thick slurry, the oil output must be at least 50 litres!