EDER Felling Wedge “TITAN 50”
The EDER Titan 50 is the smaller version of the proven EDER Titan 80 Pro. It is used in heavy timber harvesting and is an alternative to heavy wedge work. 

Compared to classic wedge variants, the EDER Titan 50 has the following advantages:

» It can be operated with an impact wrench up to 750 Nm.
» It is possible to unscrew and reposition the wedge if the stroke height is too low.
» Energy-saving and ergonomic working thanks to high lifting forces and gear ratios.
» Increased safety when felling on slopes.
» The risk of falling dead wood is reduced by vibration-free wedging.
» Encapsulated drive spindle prevents contamination and resulting damage to the drive

Technical data:
» Weight: 1.6 kg
» LxWxH: 240 x 118 x 72 mm
» Wedge feed: 100 mm
» Stroke/revolution: 2 mm
» Max. lifting force: 15 t
» Max. stroke height: 50 mm

Important note!
The spindle drive is mechanically limited. Once the full extension length of the lifting wedge has been reached, do not continue to turn the ratchet or impact wrench clockwise.
» Never turn the ratchet with force or extend it
» Do not use an impact wrench with more than 750 Nm with the Titan 50

EDER Felling Wedge “TITAN 50”
The EDER Titan 50 is the smaller version of the proven EDER Titan 80 Pro. It is used in heavy timber harvesting and is an alternative to heavy wedge work. 

Compared to classic wedge variants, the EDER Titan 50 has the following advantages:

» It can be operated with an impact wrench up to 750 Nm.
» It is possible to unscrew and reposition the wedge if the stroke height is too low.
» Energy-saving and ergonomic working thanks to high lifting forces and gear ratios.
» Increased safety when felling on slopes.
» The risk of falling dead wood is reduced by vibration-free wedging.
» Encapsulated drive spindle prevents contamination and resulting damage to the drive

Technical data:
» Weight: 1.6 kg
» LxWxH: 240 x 118 x 72 mm
» Wedge feed: 100 mm
» Stroke/revolution: 2 mm
» Max. lifting force: 15 t
» Max. stroke height: 50 mm

Important note!
The spindle drive is mechanically limited. Once the full extension length of the lifting wedge has been reached, do not continue to turn the ratchet or impact wrench clockwise.
» Never turn the ratchet with force or extend it
» Do not use an impact wrench with more than 750 Nm with the Titan 50