EDER Powerwinch 1200 capstan winch
The all-rounder!

The EDER Powerwinch 1200 capstan winch is the all-rounder among Eder Powerwinches. It impresses with its lightness and great power at a low price.
It pulls 90 times its own weight and is powered by a powerful 2-stroke engine that can operate in any position.
A lightweight plastic rope of any length is used. During operation, it runs through the EDER POWERWINCH 1200 capstan winch and can be stowed away immediately in the practical transport bag.

The capstan winch is a machine that may only be used for pulling heavy loads on the ground.

The Powerwinch is approved for use in the following areas:
» In forestry: to pull heavy loads in areas inaccessible to large machines; to ensure winch-assisted tree felling; to set up rope crane systems;
» in rescue operations, to pull vehicles that have been involved in accidents or are stuck;
» for the recovery of hunted game;
» in the construction sector, to pull building materials, cables, or pipes.

Performance:
» 1,200 kg pulling force in direct pull
at a pulling speed of 14 m/min.
» 2,400 kg pulling force with deflection pulley
at a pulling speed of 7 m/min.

Operation:
» The Eder Powerwinch 1200 capstan winch is controlled from outside the danger zone. Pulling lightly on the rope moves the throttle lever of the control unit and the winch begins to pull.

Rope brake:
» Maximum safety thanks to the rope brake! As soon as the operator releases the rope, the winch stops and the rope is clamped in the brake. This prevents the load from slipping back unintentionally and allows it to be lowered in a controlled manner.

Technical data:
» Gearbox: 1 speed
» Transmission ratio: 1:160
» Pulling power: max. 1200 kg
» Speed: max. 14 m/min.
» Engine type: air-cooled 2-stroke engine
» Carburetor: Walbro WYK 60 primer type diaphragm carburetor
» Tank capacity: 1.1 ltr.
» Clutch: Centrifugal clutch
» Throttle lever: with half throttle position 
» Noise level: 115 dB(A)
» Dimensions (LxWxH): 37 x 33 x 34 mm
» Weight: 14.922 kg
» The pull cord is not included in the scope of delivery! (FORXXX229210)

EDER Powerwinch 1200 capstan winch
The all-rounder!

The EDER Powerwinch 1200 capstan winch is the all-rounder among Eder Powerwinches. It impresses with its lightness and great power at a low price.
It pulls 90 times its own weight and is powered by a powerful 2-stroke engine that can operate in any position.
A lightweight plastic rope of any length is used. During operation, it runs through the EDER POWERWINCH 1200 capstan winch and can be stowed away immediately in the practical transport bag.

The capstan winch is a machine that may only be used for pulling heavy loads on the ground.

The Powerwinch is approved for use in the following areas:
» In forestry: to pull heavy loads in areas inaccessible to large machines; to ensure winch-assisted tree felling; to set up rope crane systems;
» in rescue operations, to pull vehicles that have been involved in accidents or are stuck;
» for the recovery of hunted game;
» in the construction sector, to pull building materials, cables, or pipes.

Performance:
» 1,200 kg pulling force in direct pull
at a pulling speed of 14 m/min.
» 2,400 kg pulling force with deflection pulley
at a pulling speed of 7 m/min.

Operation:
» The Eder Powerwinch 1200 capstan winch is controlled from outside the danger zone. Pulling lightly on the rope moves the throttle lever of the control unit and the winch begins to pull.

Rope brake:
» Maximum safety thanks to the rope brake! As soon as the operator releases the rope, the winch stops and the rope is clamped in the brake. This prevents the load from slipping back unintentionally and allows it to be lowered in a controlled manner.

Technical data:
» Gearbox: 1 speed
» Transmission ratio: 1:160
» Pulling power: max. 1200 kg
» Speed: max. 14 m/min.
» Engine type: air-cooled 2-stroke engine
» Carburetor: Walbro WYK 60 primer type diaphragm carburetor
» Tank capacity: 1.1 ltr.
» Clutch: Centrifugal clutch
» Throttle lever: with half throttle position 
» Noise level: 115 dB(A)
» Dimensions (LxWxH): 37 x 33 x 34 mm
» Weight: 14.922 kg
» The pull cord is not included in the scope of delivery! (FORXXX229210)

EDER Powerwinch 1200 capstan winch
The all-rounder!

The EDER Powerwinch 1200 capstan winch is the all-rounder among Eder Powerwinches. It impresses with its lightness and great power at a low price.
It pulls 90 times its own weight and is powered by a powerful 2-stroke engine that can operate in any position.
A lightweight plastic rope of any length is used. During operation, it runs through the EDER POWERWINCH 1200 capstan winch and can be stowed away immediately in the practical transport bag.

The capstan winch is a machine that may only be used for pulling heavy loads on the ground.

The Powerwinch is approved for use in the following areas:
» In forestry: to pull heavy loads in areas inaccessible to large machines; to ensure winch-assisted tree felling; to set up rope crane systems;
» in rescue operations, to pull vehicles that have been involved in accidents or are stuck;
» for the recovery of hunted game;
» in the construction sector, to pull building materials, cables, or pipes.

Performance:
» 1,200 kg pulling force in direct pull
at a pulling speed of 14 m/min.
» 2,400 kg pulling force with deflection pulley
at a pulling speed of 7 m/min.

Operation:
» The Eder Powerwinch 1200 capstan winch is controlled from outside the danger zone. Pulling lightly on the rope moves the throttle lever of the control unit and the winch begins to pull.

Rope brake:
» Maximum safety thanks to the rope brake! As soon as the operator releases the rope, the winch stops and the rope is clamped in the brake. This prevents the load from slipping back unintentionally and allows it to be lowered in a controlled manner.

Technical data:
» Gearbox: 1 speed
» Transmission ratio: 1:160
» Pulling power: max. 1200 kg
» Speed: max. 14 m/min.
» Engine type: air-cooled 2-stroke engine
» Carburetor: Walbro WYK 60 primer type diaphragm carburetor
» Tank capacity: 1.1 ltr.
» Clutch: Centrifugal clutch
» Throttle lever: with half throttle position 
» Noise level: 115 dB(A)
» Dimensions (LxWxH): 37 x 33 x 34 mm
» Weight: 14.922 kg
» The pull cord is not included in the scope of delivery! (FORXXX229210)

EDER Powerwinch 1200 capstan winch
The all-rounder!

The EDER Powerwinch 1200 capstan winch is the all-rounder among Eder Powerwinches. It impresses with its lightness and great power at a low price.
It pulls 90 times its own weight and is powered by a powerful 2-stroke engine that can operate in any position.
A lightweight plastic rope of any length is used. During operation, it runs through the EDER POWERWINCH 1200 capstan winch and can be stowed away immediately in the practical transport bag.

The capstan winch is a machine that may only be used for pulling heavy loads on the ground.

The Powerwinch is approved for use in the following areas:
» In forestry: to pull heavy loads in areas inaccessible to large machines; to ensure winch-assisted tree felling; to set up rope crane systems;
» in rescue operations, to pull vehicles that have been involved in accidents or are stuck;
» for the recovery of hunted game;
» in the construction sector, to pull building materials, cables, or pipes.

Performance:
» 1,200 kg pulling force in direct pull
at a pulling speed of 14 m/min.
» 2,400 kg pulling force with deflection pulley
at a pulling speed of 7 m/min.

Operation:
» The Eder Powerwinch 1200 capstan winch is controlled from outside the danger zone. Pulling lightly on the rope moves the throttle lever of the control unit and the winch begins to pull.

Rope brake:
» Maximum safety thanks to the rope brake! As soon as the operator releases the rope, the winch stops and the rope is clamped in the brake. This prevents the load from slipping back unintentionally and allows it to be lowered in a controlled manner.

Technical data:
» Gearbox: 1 speed
» Transmission ratio: 1:160
» Pulling power: max. 1200 kg
» Speed: max. 14 m/min.
» Engine type: air-cooled 2-stroke engine
» Carburetor: Walbro WYK 60 primer type diaphragm carburetor
» Tank capacity: 1.1 ltr.
» Clutch: Centrifugal clutch
» Throttle lever: with half throttle position 
» Noise level: 115 dB(A)
» Dimensions (LxWxH): 37 x 33 x 34 mm
» Weight: 14.922 kg
» The pull cord is not included in the scope of delivery! (FORXXX229210)

EDER Powerwinch 1200 capstan winch
The all-rounder!

The EDER Powerwinch 1200 capstan winch is the all-rounder among Eder Powerwinches. It impresses with its lightness and great power at a low price.
It pulls 90 times its own weight and is powered by a powerful 2-stroke engine that can operate in any position.
A lightweight plastic rope of any length is used. During operation, it runs through the EDER POWERWINCH 1200 capstan winch and can be stowed away immediately in the practical transport bag.

The capstan winch is a machine that may only be used for pulling heavy loads on the ground.

The Powerwinch is approved for use in the following areas:
» In forestry: to pull heavy loads in areas inaccessible to large machines; to ensure winch-assisted tree felling; to set up rope crane systems;
» in rescue operations, to pull vehicles that have been involved in accidents or are stuck;
» for the recovery of hunted game;
» in the construction sector, to pull building materials, cables, or pipes.

Performance:
» 1,200 kg pulling force in direct pull
at a pulling speed of 14 m/min.
» 2,400 kg pulling force with deflection pulley
at a pulling speed of 7 m/min.

Operation:
» The Eder Powerwinch 1200 capstan winch is controlled from outside the danger zone. Pulling lightly on the rope moves the throttle lever of the control unit and the winch begins to pull.

Rope brake:
» Maximum safety thanks to the rope brake! As soon as the operator releases the rope, the winch stops and the rope is clamped in the brake. This prevents the load from slipping back unintentionally and allows it to be lowered in a controlled manner.

Technical data:
» Gearbox: 1 speed
» Transmission ratio: 1:160
» Pulling power: max. 1200 kg
» Speed: max. 14 m/min.
» Engine type: air-cooled 2-stroke engine
» Carburetor: Walbro WYK 60 primer type diaphragm carburetor
» Tank capacity: 1.1 ltr.
» Clutch: Centrifugal clutch
» Throttle lever: with half throttle position 
» Noise level: 115 dB(A)
» Dimensions (LxWxH): 37 x 33 x 34 mm
» Weight: 14.922 kg
» The pull cord is not included in the scope of delivery! (FORXXX229210)